On the top of the tarp, select the edges shown in red. Chamfer the edges by about 0.1 or so. This will for a very thin line of polys. Select the thin strip of polys and extrude it inwards a small distance, say about -0.1. That completes the tarp.
The tarp is held on the car by a series of bolts so we must make those now. These are easily made with a spline. Draw the shape shown and lathe it to get the bolt.
Now simply place the bolts all around the tarp at the positions shown.
The door handle is extremely simple to make and I'm sure you would feel insulted if I went through it step by step!! All you have to do is start with a spline, make it renderable, convert it to a poly and then adjust vertices to shape it.
3DTotal
Advertisement - We need your support!
As
well as you tutorial hungry people eating through a terabit of bandwidth each
month we also have many additional staff and running costs involved in creating
these free pages. We want to continue bringing you many free tutorials and resources
everyday, so PLEASE check out our products and amazon affiliate schemes via the
above banners. Many thanks!
Next is the door latch, start with a box like the one shown.
