Keep up-to-date with Free tutorials!!

 

Sign up to our twice-monthly newsletter today for the latest tutorials, interviews and product information.

Sign me up to receive third-party emails from 3dtotal's partners, too!

- Latest news
- Exclusive Shop Offers
- Preview early content
- Plus much more

 

Not Ready to take that step? OK, Why not just Subscribe to the RSS Feed

 
submit tutorial
1 | 2
Making Of 'Vantage at Dusk'

By Ian Brink
| Your Rating:
rating star fullrating star fullrating star nonerating star nonerating star none
(1 Votes)
| 58560 Views
| 0 Comments
| Comments 0
Date Added: 2nd October 2009
Software used:
3ds Max
221_tid_image-012.jpg

Research

As with any project of this nature, the key to a realistic model is proper research and a decent set of blueprints. Having sourced the blueprints, I soon discovered that (as usual) there were certain discrepancies between the different angles represented on the blueprints. However, this was unavoidable as the angles were sourced from different locations and traced from different perspectives and photos.

Seeing as the side elevation had the most detail and was of a decent size, I decided to use this view as gospel and tweak the remaining ones accordingly. In doing so I ended up with a set of blueprints that lined up in all the important places and that I hoped would produce a final model with the correct amount of headlights and so fourth.

Concept

This specific concept initially started out as a studio render of a V8 Vantage Rally edition. I found a nice set of photos depicting this car in green livery with some orange pin striping around the nose area and over the tops of the door sills. At the time I was convinced that this was the nicest thing I've ever seen and I started on the project that same day (Fig01).

221_tid_image-000.jpg
Fig. 01

A few months after the Rally renders were done and my brain had sufficiently cooled down, I was walking along the local waterfront area in Cape Town and I discovered that they had opened a new Aston Martin Dealership. As I strolled passed the showroom floor and into the setting sun, a line of pitch black V8 Vantages with beige leather and walnut interiors peered at me from behind the glass.

That was more than enough to sell me on the concept and I decided that there could be nothing more captivating than a mood shot render of a black V8 Vantage under the setting sun. Seeing as the previous renders had a studio setup and a very clinical feel, the exterior setting for this render would be a welcome change.

Modeling

First I set up the blueprints on their respective plains, lined them up and set up a slightly see-through material for my main poly modelling purposes. When it comes to cars, I like to start on the hood area, find and model a definitive line that runs from the windscreen to the front grill, and then clone that edge sideways to extend the mesh from left to right, or vice versa. If that first line is set up correctly to the blueprints, the whole bonnet of the car will be smooth and hopefully dent free (Fig02 and Fig 03).

221_tid_Image-001.jpg
Fig. 02

221_tid_Image-002.jpg
Fig. 03

With this same principal in mind, I moved over the sides of the vehicle where I matched up the nose segments with the wheel wells. The wells are usually set up as a separate tube's whose uppermost polys ( seen in the side elevation) are attached and welded onto the nose piece mesh (Fig04).

221_tid_image-003.jpg
Fig. 04


After integrating the wheel well, I moved over the rest of the vehicle from front to back putting polygons in strategic places to assure they lined up with the doors, windows, air vents and other details on the car's body. This was by far the most time consuming part of the project; you need a certain amount of patience to ensure all the vertices line up with one another and with the blue prints in order to avoid any dents or irregularities. After the basic shape was modelled out, I extruded and chamfered the detailed edges of the doors, body panels and other areas where sharp corners and folds were needed (Fig05).

221_tid_image-004.jpg
Fig. 05

For the headlights, I simply selected the polys where the lenses would go and detached them from the main mesh. These edges were then cloned inwards to make the beginnings of the light's casings. With objects like lights I follow one basic rule: to try and get it as close to the real thing as possible. Unfortunately I didn't have the luxury of hacking an actual Aston Martin headlight in half to see exactly what it looks like inside, but I did spend many a happy hour peering into the head and taillights of cars - to the concern of some of their owners.

Next on my list were the interior, mirrors, other trimmings and lastly the wheels. This is a part of the modelling process that I enjoy greatly and there are a couple of ways to approach these parts of the mesh. For the rims and tread pattern in particular I used a common segmented approach. I modelled only one slice or spoke of the rim, and then used the 'array' command to clone these elements around a central axis to produce the full circle. The rubber was made using a simple lathe, and then the extra details like the valve, nuts and stubble were added last (Fig06).

221_tid_Image-005.jpg
Fig. 06

next page >

 
1 | 2
Related Tutorials

Tutorial

Gallery Image.



Keywords: KeyShot, Car, Scene, 3ds Max, Texturing

Go to tutorial
rating star fullrating star fullrating star fullrating star halfrating star none (8)
Comments 0 Views 3031

Tutorial

Gallery Image.



Keywords: ZBrush, Cartoon, Character, Maya, Female

Go to galleries 1
rating star fullrating star fullrating star fullrating star fullrating star full
Comments 1 Views 6690

Tutorial

Gallery Image.



Keywords: Bear, Cartoon, Making of, Tutorial, Maya, Mudbox, ZBrush, Photoshop, V-Ray

Go to galleries 1
rating star fullrating star fullrating star fullrating star fullrating star half
Comments 3 Views 19430

Tutorial

Gallery Image.



Keywords: Tutorial, Car, KeyShot, Rendering, Lighting

Go to galleries 1
rating star fullrating star fullrating star fullrating star fullrating star half
Comments 1 Views 70570
Readers Comments (Newest on Top)
no comments!
No comments yet. Be the first to comment!
Add Your Comment