With the modeling stage finished I began texturing by browsing through a bunch of maps to find the right ones to use as my texture base. For the character I chose several cloth textures for the coat, trousers, vest, tie and hat (I used "carpet08" from 3DTotal Textures V06:R2 - Clean Textures
and "fabric01", "fabric02" and "fabric12" from TTV16 - Architectural Showroom
) and for the organic parts I found some bases for the skin and animal looking eyes ("hsky15" and "ceye18" from TTV04:R2 - Humans & Creatures
and "green04" from TTV11:R2 - Alien Organic
). In the case of this picture I didn`t pay so much attention to the color of the map but rather to the pattern and the right balance between light and dark areas (Fig.07).
I started my textures by rendering out a UV layout from Max and filling out some parts with chosen base maps, in this case a denim-looking fabric (B) for the trousers and a skin base on the face and hands (A) (Fig.08 - part 1). I used Photoshop for this.
Next I color-corrected the maps (part 2). As you can see, at this point in the project, I was still undecided as to what my character was, and what color it should be. So that is why I originally started with a standard pink face.
Next, I painted in some shadows and smudges over the skin and overlaid light and dark stripes over the trousers (part 3).
At this point I decided that he was a sort of a frog - imaginatively called Mr. Froggy - so I made him green and painted even more shadows and smudges. Following the edges on the UV layout I painted some dark seams on the trousers (part 4).
Next I added some wrinkles all over the face, dark circles beneath the eyes and some pink tones around the lips and eyelids. I dirtied the trousers using a black and white dirt map (C) ("tile04heavy17" from TTV05:R2 - Dirt & Graffiti
Finally I overlaid a color-corrected, greenish noisy texture to add more detail to the skin (D). When making such a texture, I always keep my file in many layers so I can do quick fixes if needed. By adjusting the tone curves of this original map, or just some layers of it, I produced all other variants of the texture - bump, specular, sss. The same method that I used on the trousers was used on all the clothing.
The tree was the fastest to texture. I created a mix of two bark maps for the stump ("photo_bark13" from TTV10:R2 - Trees & Plants
and "vegetation08" from TTV14:R2 - Fantasy
) and a mix of gray and brown ground maps for the base ("ground19" from TTV01:R2 - General Textures
and "stone03" from TTV06:R2
). I loosely stamped these mixes over the object in ZBrush. Since the alpha of the stamp had very feathered edges, the map that was produced was somewhat blurry. To make it sharper I overlaid it with a cavity map and displacement map. A layer of green on the top for moss and the texture was done (Fig.09).
The rest of the plants in the scene used just the diffuse map (Fig.10). To create some variation in the color of the grass blades without using multiple maps, I laid out their UV coordinates in a line. I filled the texture with a base color and overlaid some dirty looking maps for variation ("green11" from TTV03:R2 - Bases & Layers
and "tile02heavy06" from TTV05:R2
).On the top I put a layer with some yellow patches for even more variation. Making textures for other plants came down to just fitting the base maps that I chosen ("photo_leaf09" and "photo_leaf10" from TTV10:R2
) to UV layout. Very simple color correction and a little editing were fast to do.
To create trees in the background I used a close up photo of a decorative pine cone (Fig.11). By cutting and assembling various pieces of the photo I created four big pines. I color corrected the trees to a darker color that suited the mood of the image. Next, I placed a gradient overlay to match the direction of the light to the rest of the scene. I finalized the trees with some hand painted highlights. Trees were then placed in the scene simply as images on the planes. I assembled the sky from various photos on top of witch I airbrushed the lighting I wanted. I don`t know why I painted the sky map in detail since I intended to have defocused background from the start.
Lighting was done at the same time as the materials, adjusting one to work well with the other. I used an old but fast and functional method (Fig.12).
First I created an array of 16 pale blue lights with a very low intensity (multiplier at 0.2). That array acted as an ambient sky light (marked in a picture with B). Using a bunch of spotlights like this makes renders much faster than using an actual skylight.
To simulate the sun I used two pale yellow lights with high intensity (multiplier at 3, marked with C & D). Higher light acts as a direct sun and the lower light simulates rays bouncing off the ground.
Finally I added another pale yellowish light as a fill light (multiplier at 0.5, marked with A).
As I was tweaking the lights I also tweaked the materials. All materials were very simple. For foliage I used the standard 3ds Max translucent shader with the same map in diffuse and bump slots. For clothing I used a falloff map set to Fresnel with my diffuse texture as a sub map in both slots. The map around the edges was lighter faking a very scattered reflection. Again, I used the same map in the bump slot. For the skin I mixed two materials through a falloff map set to shadow/light. One was a standard phong material and the other was a translucent shader with a purple version of the diffuse map (marked with sss in Fig.07). This faked some sub surface scattering. Other materials in the scene were just simple variations. In many of them I used a HDRI map for reflections again through a Fresnel falloff map (I just love those handy falloff maps!)
< previous page next page >