Generate FumeFX System
We are going to use three important things from the FumeFX System: the FumeFX Container, FFX Particle Source and the FFX Gravity Vector.
First, to create the FumeFX Container, go to Create Panel > Geometry and click on FumeFX in the dropdown menu. Now click on the FumeFX button and Generate Container in the viewport. Rename FumeFX01 to LSS Container, and in the viewport, change the position of the LSS Container as follows:
X : 3.0
Y : -150.0
Z : 0.0
To create the FFX Particle Source, go to Create Panel > Helpers and click FumeFX on the Dropdown menu. Click on the Particle Src Button and Generate in Viewport. Now Rename FFX Particle Src01 to LLS Src.
To create the FFX Gravity Vector, go to Create Panel > Helpers > Click on Dropdown menu > FumeFX and click on the Gravity Vector button and Generate in Viewport. The Gravity Vector will change the Gravity Direction according to the icon. In the viewport, change the rotation of the FFX Gravity Vector01 to the following:
X : 90.0
Y : 0.0
Z : 0.0
Setting the FumeFX Container, FFX Particle Source and the FFX Gravity Vector
Editing the FumeFX system
There are five important sections in FumeFX which we are going to modify: Gen (General), Sim (Simulation), Rend (Rendering), Illum (Illumination) and Obj/Src (Objects and Sources).
First, the Gen parameters should be changed as shown in the image below.
These are fairly straightforward number-switches, though to isolate the output path click on the small button next to output path, make a new folder on your storage drive and save your cache file (FXD) as LSS_test_ in that folder. Donít save cache file in your C: Drive though, as sometimes it contains more than 100GB Space, so you might face some problems.
As a tip, to make massive and detailed smoke, you have to make a large container with low spacing. It'll take time to simulate but it will give you a proper result. This said, you should have a good machine to work on Ė Iím using a Core i7-2700K CPU, with 3.50GHz and 16GB RAM.
These are the parameters you should set your Gen settings to
The Simulation settings
You should apply the following settings to the Simulation panel of the FumeFX UI (see the image below). Donít change any parameters from the Fuel, Smoke or Temperature Ė keep it default.
As a tip
- Turbulence Noise is very important to define the volume of smoke.
Apply the following settings to your Simulation panel
The Rendering settings
You wonít need to change anything in the rendering parameters menu, just uncheck the Fire tab in the Fire menu.
The following settings are needed in the Rendering tab